View TLP72207_4124483.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLP722
TOSHIBA Photocoupler Photo-Diode
TLP722
Unit in mm The TOSHIBA TLP722 consists of a photo-diode optically coupled to a gallium arsenide infrared emitting diode in a four lead plastic DIP (DIP4). TLP722: Single circuit * * * * * * * Cathode-anode voltage: 30V (max) Current transfer ratio: 0.1% (min) Input / output isolation voltage: 4000Vrms (min) Operating temperature range: -55~100C Storage temperature range: -55~125C UL recognized: UL1577, E67349 VDE approved: EN60747-5-2 Maximum operating insulation voltage: 890VPK Maximum permissible over voltage: 8000VPK
(Note): When an EN60747-5-2 approved type is needed, please designate the " Option (D4) " * * SEMKO approved product: SS EN60950, approved No. 9808324 / 01 Construction mechanical rating
TOSHIBA Weight: 0.28 g
11-5B2
Pin Configuration
TLP722 type Creepage distance Clearance Insulation thickness 7.0 mm 7.0 mm 0.4 mm TLP722F type 8.0 mm 8.0 mm 0.4 mm
(top view)
1
2007-10-01
TLP722
Absolute Maximum Ratings (Ta = 25C)
Characteristic Forward current Forward current derating LED Pulse forward current Pulse forward current Reverse voltage Cathode-anode voltage Detector Anode-cathode voltage Photodiode output current Junction temperature Storage temperature range Operating temperature range Lead soldering temperature (10 s) Isolation voltage Symbol IF IF / C IFP IFTP VR VKAO VAKO IPB Tj Tstg Topr Tsol BVS Rating 25 -0.45 (Ta 70C) 1 (1s pulse, 1000 pps) 1 (100s pulse, 1000 pps) 5 30 0.5 100 125 -55~125 -55~100 260 (10s) 4000 (AC, 1min., R.H. 60%) Unit mA mA / C mA A V V V A C C C C Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Individual Electrical Characteristics (Ta = 25C)
Characteristic Forward voltage LED Reverse current Capacitance Cathode-anode breakdown voltage Detector Anode-cathode breakdown voltage Dark current Photodiode output current Capacitance Symbol VF IR CT V(BR)KAO V(BR)AKO Ileak IPB CAK Test Condition IF = 16 mA VR = 5 V V = 0, f = 1 MHz IKA = 0.1 mA IAK = 0.1 mA VKA = 10 V VKA = 10 V, Ta = 85C V = 10 mA, VKA = 5 V V = 0, f = 1 MHz Min 30 0.5 10 Typ. 1.65 30 10 Max 1.85 10 50 1 50 Unit V A pF V V nA A A pF
Isolation Characteristics (Ta = 25C)
Characteristic Capacitance (input to output) Isolation resistance Isolation voltage Symbol CS RS BVS Test Condition VS = 0, f = 1 MHz VS = 500 V AC, 1 minute AC, 1 second, in oil DC, 1 minute, in oil Min 1x10
12
Typ. 0.8 10
14
Max
Unit pF Vrms Vdc
4000
10000 10000
2
2007-10-01
TLP722
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
3
2007-10-01

▲Up To Search▲

Price & Availability of TLP72207

	To Download TLP72207 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .